In this article, Ralph Moulang, Aurecon's Principal Overhead Wiring Engineer, discusses how cities can integrate new and existing light rail systems into the urban environment while meeting the requirement for continuous uninterrupted
They have remained unchanged, mainly as a result of their relative simplicity and concomitant reliability. They suffer, though,
The question that I hear
A simple online search will reveal several futuristic solutions to this issue; the problem with the future, however, is that it keeps turning into the present. Fortunately, some of these systems are available now and can be grouped according to the method by which they transfer traction power to the LRV and from the LRV to the traction motors:
This system comprises a continuous primary circuit formed from power cables buried between the rails, producing a strong magnetic field. A power receiver system (coils) is mounted under the LRV, which converts the magnetic field to electrical energy.
The ground-level components are not visible and are unaffected by weather. As there is no direct contact between the power source and the LRV, the traction components are not subject to wear. This system has been employed by Bombardier as part of their PRIMOVE system, which features 8-meter cable conduits
This system is similar to a traditional ground-level conductor system in which traction power is transmitted along a segmented conductor rail embedded between the rails and transferred to the LRV via a collector shoe.
The difference and key feature of the segmented system is that each segment is
As this system relies on ground-based contact, it is susceptible to adverse weather conditions, including standing water, ice and snow as well as natural (sand and leaves) and man-made contaminants.
Both Ansaldo STS’s TramWave and Alstom’s APS system make use of this principle.
The basic principle is an LRV fitted with a self-contained power source capable of operating a normal service with only short and infrequent recharge requirements. Thus, the LRV can operate in all environments, since adverse weather or other topographical features shouldn’t inhibit power transfer.
For this reason, although many LRVs
The common feature of these systems is that recharge can occur at stations or while the LRV is running on traditional OCL, which is the basis of the hybrid approach, whereby a traditional LRV, with standard pantograph, is retrofitted with an on-board storage system.
Does this mean overhead wires will be a thing of the past
That depends upon several factors, not the least of them being
This presents an opportunity for competent engineering consultancies
A few examples of practical applications of some of these alternative technologies are:
These systems represent the latest technology, in terms of traction distribution for LRVs. And, as is the case with all new technology, if it proves to be effective, costs will reduce; reliability will increase; and we can look forward to a safer, more visually attractive public transport system.
Sed fugit interea, fugit irreparabile tempus, singula dum capti circumvectamur amore, Georgics by Virgil, 29 BC.
"But meanwhile it flees: time